Inspections are not random in what they find. The same categories of citations come up year after year in aggregate and industrial plants, which means most of what an inspector will write up is knowable in advance. The plants that come through clean are not lucky — they run the inspection on themselves first.
Here is what inspectors look at, the paperwork that saves you, and how to run a mock inspection that actually resembles the real thing.
What inspectors look at
Guarding. Machine guarding is a perennial top citation category for both MSHA and OSHA. Conveyor head and tail pulleys, self-cleaning tail pulleys, V-belt drives, couplings, pinch points at return rollers near walkways. An inspector will walk your conveyor lines specifically looking for missing, damaged, or removed-and-never-replaced guards. Guards taken off for maintenance and left off are the classic easy citation.
Housekeeping and accumulations. Spillage around transfer points, material buildup on walkways and stairs, dust layers on elevated surfaces, blocked egress. In plants with combustible dust, accumulation reads as a fire and explosion issue, not a tidiness issue. Belt carryback that piles up under conveyors is both a housekeeping citation and a signal to the inspector that maintenance is behind.
Dust controls in operation. Not whether you own dust suppression and collection equipment — whether it was running and working when the inspector walked through. Water sprays that are valved off, collectors with broken bags, enclosures with missing skirting or torn curtains. An installed control that is not functioning can look worse than no control, because it documents that you knew.
Exposure records. Silica, noise, and other health hazards. Sampling results, who was sampled and when, whether results were shared with employees, what you did when a result came back high. Respirator program documentation where respirators are in use, including fit testing and medical evaluations.
Training documentation. For MSHA, Part 46 or Part 48 plans and records — new miner training, annual refresher, task training, site-specific hazard awareness for contractors and visitors. For OSHA, hazard communication, lockout/tagout authorization, powered industrial truck certification, and training tied to whatever your written programs promise. The inspector’s trick is simple: pull an employee’s file, then ask that employee questions. The record and the person need to match.
Workplace exams and equipment records. MSHA expects documented workplace examinations and pre-shift equipment inspections. Gaps in the log are as citable as hazards on the ground.
Where the silica rules stand
This is the area where aggregate operators need to read carefully, because the two agencies are in different places.
OSHA general industry silica is fully enforced. Under 29 CFR 1910.1053, the permissible exposure limit is 50 µg/m³ as an 8-hour time-weighted average, with an action level of 25 µg/m³. Cross the action level and you owe periodic exposure monitoring; cross the PEL and you owe engineering controls, a written exposure control plan, and medical surveillance obligations. If you run a general-industry operation — ready-mix, manufacturing, asphalt plant under OSHA jurisdiction — this is live now.
MSHA’s silica rule is in limbo. The 2024 rule (30 CFR Part 60) set the same uniform numbers — 50 µg/m³ PEL, 25 µg/m³ action level — for all mines. Metal and nonmetal mines were to comply by April 8, 2026, but the Eighth Circuit stayed compliance in April 2025, and the rule remains delayed pending judicial review as of this writing. Do not read the stay as a reprieve. The engineering work that compliance requires — dust suppression, enclosure sealing, collection upgrades, baghouse rehabilitation — takes quarters, not weeks, and the health hazard does not care about the docket. Prepare now; if the stay lifts, the plants that waited will be competing for the same contractors at once.
The paperwork that saves you
When an inspector finds a condition, the difference between a serious citation and a manageable one is often what you can produce on the spot:
- Current written programs: exposure control plan, hazard communication, lockout/tagout, respiratory protection, emergency action plan
- Training records organized by employee, current within required intervals
- Exposure sampling results with dates and follow-up actions
- Workplace exam and pre-shift inspection logs, complete and signed
- Maintenance and repair records — especially for guards, dust controls, and anything previously cited
- Your Dust Hazard Analysis, if combustible dust applies to you
- Abatement documentation from prior citations, closed out with evidence
A finding plus a record showing you identified it and had a dated fix in motion is a very different conversation from a finding plus a shrug.
Run a mock inspection
Once or twice a year, have someone play inspector for half a day — ideally someone who does not walk the plant daily, because familiarity blinds. The script:
- Arrive unannounced to your own team. Real inspections do not schedule themselves around your good days.
- Walk the full material path — from feed to loadout — looking only for guarding, housekeeping, and egress issues. Take photos.
- Check dust controls in operation. Sprays flowing, collectors pulling, enclosures intact. Note anything valved off or bypassed and find out why.
- Pull three employee files at random and verify training is current. Then find those three employees and ask them what the training covered.
- Ask for the paperwork cold. Give a supervisor fifteen minutes to produce the written programs, last quarter’s exam logs, and the most recent sampling results. Time it. In a real inspection, fumbling reads as disorganization everywhere else too.
- Write it up like a citation list — condition, location, photo, owner, due date — and track every item to closure. This document, ironically, is one you want: it shows a functioning safety system.
Fix the findings that keep coming back
If the same items appear in every mock inspection — spillage at the same transfer point, the same guard off, the same dust cloud at loadout — stop treating them as housekeeping and start treating them as engineering problems. Recurring spillage means containment has failed. Recurring dust means suppression or collection is undersized or worn out. Inspectors recognize chronic conditions, and so do the attorneys who read citation histories after an accident.
The ACT Group has supported Southern California aggregate, cement, and industrial plants from our Fontana location for more than thirty years — belt cleaners, transfer point systems, dust collection design, and baghouse service that turn repeat findings into closed items. If you want help getting the plant inspection-ready, reach out and we will schedule a walkthrough.