The ACT Group splices and replaces conveyor belts across Nevada — hot and cold vulcanizing, mechanical fasteners and belt installation for the mines along I-80, the aggregate and cement operations around Las Vegas and Reno, and the processing plants in between. Nevada licensed (#0072789), MSHA trained, mobilized from Fontana with the press and 20,000+ feet of belting.
Nevada moves more tonnage on conveyor belts per resident than any state in the country: crushed ore and leach feed at the gold and silver mines from Carlin to Winnemucca, lithium and copper operations, aggregate and cement for Las Vegas construction, and the plants in Henderson and Sparks that process all of it. Most of those belts are a long way from a splicing crew. We close that distance — Nevada licensed, MSHA Part 46 and 48 trained, and mobilized from Fontana with a vulcanizing press, fasteners and belting on the truck. Since 1991 our belt customers in Nevada have included Granite Construction and Cemex.
Hot Vulcanized Strength: A hot splice runs at nearly the full rated tension of the belt — the only splice that belongs on a primary crusher feed, an overland or a leach-pad stacker.
Planned Around the Trip: We schedule Nevada belt work in blocks — several splices, a belt change plus idlers, or belt work bundled with silo cleaning and dust collector service — so mobilization is spread across the job.
Belting on the Truck: 20,000+ feet in stock in Fontana across common widths and grades, so a Nevada belt replacement does not wait on freight from the Midwest.
Hot and cold vulcanized splices: Plies stepped, cemented and cured in a portable press on your conveyor; or chemically bonded cold splices where schedule or access demands.
Mine-site belt work: Splices, belt replacement and tracking on crusher feeds, stackers, overlands and mill conveyors under your MSHA site plan, with training records in hand.
Belt installation and replacement: New belt pulled in, spliced endless, tracked and commissioned during planned outages — see conveyor belt services.
Mechanical fasteners: Hinged and solid-plate fasteners installed to spec for temporary repairs and frequently shortened belts.
Idlers, pulleys, cleaners and skirting: The parts that wore the belt out, replaced on the same trip — see industrial parts.
Las Vegas, Henderson, North Las Vegas, Boulder City, Pahrump and Mesquite; Reno, Sparks, Fernley, Carson City and Minden; and the I-80 mining corridor — Lovelock, Winnemucca, Battle Mountain, Carlin and Elko — plus Yerington, Tonopah, Hawthorne and Ely.
Belt down at a plant outside Henderson? Call and we will give you a real mobilization time. Shutdown at a mill near Elko next quarter? Send the belt list and we will quote splices, belts and the parts that should change while everything is stopped.
This is the Nevada page for our conveyor belt vulcanizing & splicing service. See also silo cleaning in Nevada and in-stock conveyor belting, or contact our team for a fast quote.
Nevada licensed, MSHA trained, with the press and the belt on the truck
Most Nevada belt work waits on a crew flying in or a distributor shipping belt from another region. Ours drives up the I-15 with the press, the fasteners and the belting on the same truck, and can pick up silo cleaning or a baghouse change-out on the way. Southern Nevada is a phone call; the I-80 mining belt is a planned trip.
While the crew is in Nevada, add silo cleaning, air cannon installation or dust collector service to the same trip and the same quote.
Silo Cleaning in Nevada · Conveyor Belting · Idlers · Baghouse Service
Yes — Nevada contractor license #0072789, and our crews carry MSHA Part 46 and 48 training for surface and underground operations, with the site-specific documentation mine operators require.
Southern Nevada is under four hours from Fontana — emergency splices are typically same-day or next-morning. Reno, Sparks and the I-80 corridor are scheduled trips, usually within the week, and we bundle work to make the trip pay.
We bring it. 20,000+ feet in stock in Fontana across common widths and grades rides up with the crew, so a belt replacement does not wait on freight. If you have belt on site, we will splice that.
That is how most Nevada customers use us — splices plus idlers and cleaners, a belt change plus a silo cleanout, or belt work plus a baghouse change-out, all on one mobilization and one quote.
Vulcanized versus mechanical, how a hot splice is built ply by ply, why belts mistrack after a repair, and how to spec belting that lasts. Free reading, no forms.
Vulcanized vs. mechanical →Why belts mistrack →Applied Conveyor Technology — bulk material handling experts. Dust control, conveyor services, silo cleaning, parts, and engineering.
909-350-4703
888-480-0680 (toll-free)
Industrial Services
Industrial Parts
About Us
Blog
Contact
Service Areas
Silo Cleaning: Inland Empire · Los Angeles · Nevada
Dust Collection: Inland Empire · Los Angeles
Belt Vulcanizing: Los Angeles · Nevada
© 2026 The ACT Group (Applied Conveyor Technology). All rights reserved.
Field-tested fixes, new parts, and plain-spoken advice from the ACT crew. An email now and then — no spam, unsubscribe anytime.