Ceramic Belt Cleaner
The Ceramic Belt Cleaner’s alumina ceramic segments shrug off constant abrasion, corrosion and 350°F operation — proven in mining, metallurgical, aggregate, cement, pulp and port operations across North America and beyond.
The only contact with the belt is two flat, slippery surfaces on the bottom of each segment, sliding along the belt cover rather than scraping it the way urethane, rubber and aggressive tungsten carbide do. The profiled leading edge separates solids and liquids from the belt, and with no obstructions to build up on, cleaned material is pushed over the top and into the chute.
Key Features:
- Outlasts urethane at least 4-to-1 — a service life of a year or more instead of weeks to months.
- 85–95% of fugitive material removed, consistently, not just when the blade is new.
- 350°F continuous operation.
- Lightweight (15–30 lbs): installs in about 2 hours without modification.
- Only the primary is replaced — your current secondary cleaner stays.
- Conforms to FRAS specs for underground coal and extreme-heat installations.
- Handles concentrate, pellets, aggregate, cement, coal, oil sand, sticky clays, fines, corrosives and frozen material.
At a glance
Blade materialAlumina ceramic segmentsContinuous operation350°FTypical installation~2 hoursBelt widths12″ to 120″+, shipped from stockReturn on investmentSix months or less, performance guaranteed
Not sure which blade belongs on your belt? Read Urethane vs. Carbide Blades.
Ready to Order?
Send your belt width, speed and material. Call (888) 480-0680 or add it to your quote list and our team will come back with pricing and lead times.
Literature & spec sheets

Alumina ceramic segments that slide rather than scrape — outlasts urethane at least 4-to-1 and runs at 350°F.
Download PDF · 180.6 KB
